Portable Fire Monitor

ES0304-PRM

Maximum Flow 1250 GPM @ 145psi (4800L-min @ 10 bar)

The EUROSAFE Brand ES0304-PRM Portable Fire Monitor is a high-tech product with the highest fire-fighting efficiency and the safest protection of life and property in fire-fighting equipment.

It is composed of mechanical transmission device, master stream nozzle, wireless remote control, servomechanism, etc. It is an integrated design, compact structure and easy to carry.

In the event of a fire, firefighters can connect the water inlet of monitor to fire hose and insert the four legs spike at the bottom into the ground. The safety belt is fastened to a fixed position and then evacuated from the scene, which can be a long distance away. Wireless remote-control operation can also be used to extinguish the fire through the button on the operation panel to avoid casualties. When operating with a wireless controller, the fire monitor can be rotated horizontally and vertically, switch straight stream or fog pattern, so that fire sources in various directions can be extinguished.

Eurosafe ES0304 PRM Portable Fire Monitor INDIVIDUAL POST PAGE

FEATURES

  • Stainless steel 304 construction
  • Elevation stream range of 60°, from +30° to +90° (angle adjustable)
  • Horizontal 340°(angle adjustable)
  • Stainless steel folding legs
  • Stainless steel spikes for extended resistance to wear
  • Large handle for excellent portability
  • Nozzle has a built-in stream sharper
  • Available for straight stream and fog pattern
  • Control system with RC transmitter and control panel
  • Servomechanism system
  • Battery is quickly removable
  • Long service and easy repair
  • Liquid-filled pressure gauge
  • Flow rate 1200-4800 LPM
  • Water Jetting Range: Max ≥85 meters@4800LPM
  • Working Pressure: 8-16 bar (0.8-1.6 MPa)
  • Net Weight: 25kg (Monitor); Gross weight: 52kg
  • Wooden Case Package: 105*52*72cm
  • Color: RAL3000 Red standard

Specification

ES0304-PRM Technical Specifications
ModelES0304-PRM12-18-24ES0304-PRM36ES0304-PRM48Material
Flow Rate1200-1800-2400 LPM,
Adjustable Nozzle		3600 LPM Constant Nozzle4800LPM Automatic NozzleBody: Stainless Steel 304
Nozzle: Hard Anodized Aluminum alloy
Folding leg: Stainless Steel
Spikes: Stainless Steel
Working Pressure0.8 MPa1.0 MPa1.0 MPa
Water Jetting Range≥ 65 meters≥ 75 meters≥ 85 meters
Max. Fog Angle120°120°120°
Outlet2.5” NH Connection2.5” NH Connection3” NH Connection
Inlet2x2.5”, All International Coupling available2x2.5”, All International Coupling available2x2.5”, All International Coupling available

SIDE A DETAILS VIEW

PRM Portable Fire Monitor SIDE A DETAILS VIEW

SIDE B DETAILS VIEW

PRM Portable Fire Monitor SIDE B DETAILS VIEW

COMPONENT LIST

ES0304-PRM Standard Components
NAMEMonitor Device (Standard)Battery Charger (Standard)
IMAGE Monitor Device ES0304-PRM Monitor Device Image Battery Charger CDQ24V Battery Charger Image
MODEL NO.ES0304-PRMCDQ24V
DESCRIPTIONDC 24V is standard, DC 12V / AC 220V optional24V Charger for Battery
2X2.5” inlet flange, others customized
NAMESafety Belt (Standard)RC Transmitter (Standard)
IMAGE Safety Belt AQS-01 Safety Belt Image RC Transmitter CTRL-RCT01 RC Transmitter Image
MODEL NO.AQS-01CTRL - RCT01
DESCRIPTIONFor fixed monitorMax. 150 meters RC Distance
IP67 Standard Sealed

Danger !

  • Understand manual before use. Operation of this device without understanding the manual and receiving proper training is a misuse of this equipment.
  • Risk of sliding increases at low elevation angles. To reduce risk of injury or death from sliding, test safety elevation plunger before using.
  • This Instruction Manual is intended to familiarize firefighters and maintenance personnel with the operation, servicing, and safety procedures associated with the portable monitor. This manual should be kept available to all operating and maintenance personnel.

Operating & Brief InSTRUCTIONS

The portable base legs are extended by following these steps:

  1.  Hold the base carrying handle with one hand and grasp the end of one of the longer legs with the other hand.
  2. Pull this leg away from the base forward in an arc, until the locking pin engages. The locking pin is spring loaded and automatically engages when the legs are in the correct position. Watch the leg lock knob drop down even with the lower band on the base, indicated by an arrow.
  3. Repeat steps 1 & 2 for the other set of legs.
  4. Set portable base on even ground with all leg spikes in contact with the ground.
  5. Lift the storage cap to remove the anchor strap stored inside the base. Keep the strap near the monitor as it will be used to tie off the monitor before use.
  1.  Pull up on one of the spring-loaded leg lock knobs to disengage.
  2. Grasp the forward leg on the same side as the knob and push it in an arc, towards the rear of the unit. The leg lock knob may be released as soon as the front leg begins to move out of position.
  3. Continue to push until both legs come in contact with the rear stop.
  4. Repeat steps 1, 2, & 3 for the other set of legs.

WARNING!

  • In the unfolded position, the legs provide a stable base for operation of the monitor. Lack of stability can cause an out-of-control monitor resulting in injury or death. Do not operate as a portable monitor with one or both legs in the folded position.

RC TRANSMITTER OPERATION

RC Transmitter Operation — ES0304-PRM
BUTTONSDESCRIPTION
EMERGENCY STOPThe red button, rotate to disconnect the signal connection with Fire Monitor
STARTThe green button, connect the signal connection with Fire Monitor
LEFTTurn left the nozzle horizontally
RIGHTTurn right the nozzle horizontally
UPTurn up the nozzle vertically
DOWNTurn down the nozzle vertically
JETStraight stream
FOGFog spray
RECRecord action
PLAYPlay the recorded action and working automatically
RC TRANSMITTER 2

CONTROL PANEL OPERATION

Fire Monitor Control Button Descriptions
BUTTONSDESCRIPTION
LEFTTurn left the nozzle horizontally
RIGHTTurn right the nozzle horizontally
UPTurn up the nozzle vertically
DOWNTurn down the nozzle vertically
JETStraight stream
FOGFog spray
RECRecord action
PLAYPlay the recorded action and working automatically
RESETReset the recorded action
CONTROL PANEL OPERATION

AUTOMATIC, CONSTANT, SELECTABLE FLOW NOZZLES

The EUROSAFE ES0304-PRM Portable Monitor could attached a variety of water/ water & foam nozzle.

This instruction main for Automatic flow nozzle, if you have special requirements, Please view our website to contact our sales team for more info – www.eurosafeglobal.com

Stacked Nozzle

Stacked Nozzle

Foam Attached Nozzle

Foam Attached Nozzle

Flow Adjustable Nozzle

Flow Adjustable Nozzle

OPERATIONAL REQUIREMENTS & PRECAUTIONS

  • The personnel operating the fire monitor must be trained in operation and be familiar with the relevant Operation process.
  • The inlet pressure of water shall not be higher than the working pressure of the monitor.
  • Before using the fire monitor, all personnel in front of the muzzle should be evacuated to avoid danger.
  • When manually operating the fire monitor, please take the handle to avoid danger.
  • When operating, it should be jetted downwind as far as possible to increase the range.

MAINTENANCE

*The maintenance of fire monitors should be handled by dedicated personnel.

  • The fire monitor should be kept clean. After use, the nozzle should be tilted to pour out the remaining liquid in the cavity, and the exterior should be cleaned with clean water and wiped off the water stains. Dual-purpose monitor(water/foam), the interior must be rinsed with clean water, and then the accumulated water must be released.
  • The fire monitor should be maintained regularly, and all fasteners of the fire monitor should be inspected after use and every six months.
  • The meshing part of the worm gear and other rotating parts should be filled with grease for half a year to ensure flexible rotation.
  • All parts should be kept in good condition. If the fasteners are found to be loose and other accessories are damaged, they should be repaired in time.
  • When not in use, cover it with a rain-proof cloth. The unit should be stored in a normal temperature, dry and non-corrosive place.
  • When the working pressure of the fire monitor is found to be too high or the shooting range is short, check whether there is any blockage at the nozzle, and clear it in time.
  • If there is leakage at each connection part of the fire monitor, check whether the seal is intact, and replace the seal in time if damaged.
  • The rotating part of the fire monitor is not flexible, the operation is difficult, or the angle adjustment cannot reach the expected range, grease should be applied to the rotating part or the parts should be replaced in time.
  • In cold areas, take measures to prevent cold and frost, such as drainage and heat preservation.
  • When the fire monitor is used as the vehicle monitor of a fire truck, should be fixed to prevent bumps during driving and damage to the monitor parts.

ORDERING GUIDE

  • Model Number
  • Inlet Connection way, size and standard.
  • Order Quantity
  • Shipping/Transportation Way

*Other special requirements please contact EUROSAFE SALES TEAM.

Tips: for more related products or other firefighting equipment, please forward to our website,