Close this search box.

HFC-227ea Clean Agent Fire Extinguishing System

Because it is rapidly responding and leaves no hazards behind, the HFC227ea Clean Agent Fire Extinguishing System is an outstanding extinguishing system. It is intended to extinguish Class A, B, and C flames. This sort of system is completely safe to discharge near persons since there are no dangerous chemicals in the extinguishing agent. According to the stored form of power gas, HFC227ea Clean Agent Fire Extinguishing System are classed as outside stored pressure or inside stored pressure. It is available in pipe network and cabinet configurations.

Pressures of 2.5Mpa, 4.2Mpa, and 5.6Mpa are available.

How HFC227ea Clean Agent Fire Extinguishing System Work

HFC227ea Clean Agent Fire Extinguishing System operate on the principle of total flooding. When a fire is detected, the system releases HFC-227ea into the protected area within seconds. The agent discharges as a gas, rapidly filling the space and suppressing the fire. HFC 227 works by removing heat from the fire, interrupting the chemical reaction, and lowering the oxygen concentration to a level that cannot sustain combustion. Its fast-acting nature and ability to reach all corners of an enclosure make it highly effective in extinguishing fires.

Applications of HFC227ea Clean Agent Fire Extinguishing System

HFC227ea Clean Agent Fire Extinguishing System find applications in a diverse range of industries and environments, including:

  • Telecommunications facilities
  • Power generation and distribution facilities
  • Industrial manufacturing plants
  • Laboratories and research facilities
  • Marine and offshore installations
  • Museums, archives, and historical buildings

EuroSafe system assembly

A typical EUROSAFE HFC227ea Clean Agent Fire Extinguishing System includes a gas cylinder suite, a manual discharge device, a guiding hose, an emission hose, a check valve, a manifold, a pressure-relief device, a directional valve, a pressure-operated switch, pipe fittings, a nozzle, and the units that connect the fire suppression system to an automatic fire alarm system.

Some of the components listed above may be unnecessary depending on the actual use.

HFC227ea Clean Agent Fire Extinguishing System

Technical Parameters

40L,50L,60L,70L,80L,90L,100L,120L,150L and 180Lsteel cylinders all meet the requirements of TPED.

Hydraulic test pressure69.0bar(1000psi)
Working Pressure34.5bar(500psi)
Hydraulic test pressure138.0bar(2000psi)
Working Pressure69.0bar(1000psi)
Paint SpecificationRed polyester powder Coated

Design processes of fire suppression system

Cost Analysis

The cost of an HFC-227ea fire suppression system depends on various factors, including the size of the protected area, the complexity of the installation, and the required storage capacity. While the initial investment may be higher compared to some other systems, the benefits of quick fire suppression, minimal damage, and reduced downtime can outweigh the upfront costs in many cases. A comprehensive cost analysis should consider the long-term savings and the value of protecting critical assets.

Certification and standard


The HFC-227ea fire suppression system is appropriate for most commercial and industrial settings. Bank strong room, library, bookshop, electronic data processing center, telephone switching studio, communication center, transformer and switchgear room, control room, testing lab, and inflammable liquid storage room are typical areas it can protect.